15" Long, Gain Antenna for use with Dual Band HT

KNOW WHAT KIND OF CONNECTOR YOU NEED

The term "reverse SMA" gets misused when talking about Chinese radios.  There is such a thing as a "reverse" connector but it's not what 99% of those using the term really mean.  NO Chinese radio that I know of uses a "reverse" connector.

All radios I sell have the same connector gender.  The radio has a threaded recess with center pin.... SMA Male.   The antenna has a threaded stud with center hole... SMA Female.  These are "standard" connectors.  "Reverse" connectors would have the "pin" and "hole" switched around.

The SMA connector consists of a threaded outer part (1/4-36) and an inner part that has either a "pin" or a "hole".  The threaded part has nothing to do with the gender of the connector.  The gender is determined by either the "male" pin or the "female" hole.  On a standard SMA connector having a "threaded stud", it will have a hole, making it a SMA Female connector.  This SMA Female will screw into a "threaded recess" with a center pin, which is a SMA Male connector.

So what is a "reverse SMA" connector?  It has the same threaded part, but the interior of the connector is the opposite.  For example, a threaded stud with a center pin would be a reverse SMA female connector.  A threaded recess with a center hole would be a reverse SMA male connector.

 Notice:
If you order the wrong connector,
you will have to pay postage BOTH directions for an exchange